(C)2004 - XPLAB S.a.s - Brescia - Italy
===================================================================================================
Tecnical note: 001
         date: 12/05/2004
Title        : Starting XPOLYPLUS 
Status       : Active
===================================================================================================
Abstract     : Explain how to start XPdev, XPwin, XPrun
===================================================================================================

* XPDEV
  To start XPDEV just type:
  -> xpd<CR>
  from the installation directory
  - The desktop size is controlled by global set XVGA (see below)

* XPWIN
  To start XPWIN: 
  execute it from the installation directory.
  - The desktop size is controlled by global set XVGA (see below) or by windows desktop size.
  - If you have an HardLock Key, to install the drive from the itfwin directory execute (one time):
    ->Hldr32<CR>
  - If you don't have Hardlock Key, require a soft key to xplab@xpolyplus.com with the CODE 
    displayed by XPwin.
    *** Remember to indicate :
    Your name, company and address name, fax number, email (generic email are not acepted).

* XPRUN ( an application)
  From the installation directory execute:
  -> xpr project.prj\application<CR>
  Where project.prj = project directory
    and application = name of application
    if the application is compiled you have to add the extention .xpr
  - The desktop size is controlled by global set XVGA (see below)  

* GLOBAL 
  - XVGA
    This set control the desktop size. The format is: SET XVGA= xres,yres
    Where xres could be: 640, 800, 1024, 1280
      and yres         : 480, 600,  768, 1024

<EOF>